Sparkle Tile Listello Aluminium U Shape Trim Edge Gold Decorative
Metal Corner
Application
10mm x 10mm Sparkle Listello.
Length: 1.0Lm
This versatile Listello can be used horizontally or vertically as a
feature strip in wall applications.
Create an extra special look to your tiling with these fantastic
coloured Sparkle Listellos.
It can also be used as a divider, crack inducer or even as a
decorative feature as well as a Listello strip to break up an
expanse of mosaic or standard tiling.
Feature
There are many reasons to choose aluminium for interior fittings.
This extraordinary material has an array of properties that have
made it a key ally of interior designers and architects. It is
lightweight, visually appealing and hard-wearing - with its glossy
or satin finishes, it fits in perfectly in elegant spaces while
being high-performing at the same time. We offers a broad range of
aluminium listello tile trims to provide functional solutions to
every home building and improvement requirement.
Use
1. Choose shape and profile according to tile thickness.
2. Apply thin set mortar according to manufacturer’s directions to
the area where profile is to be placed, using the appropriate size
U notch trowel.
2a. For edging and outside wall corners using L-Shape or R-Round
Bullnose, finish tiling one wall first, then trowel thin set mortar
over corner areas of second wall.
2b. For the U-Shape Reducer, fill the hollow space beneath the
sloped section of profile with thin set mortar before setting the
trim.
3. Press the perforated anchoring leg of the profile into the
mortar until mortar fills the circle cutouts. Then align trim with
tile edge making sure the tile is flush against lower edge of trim
face to ensure a uniform grout joint space between trim and tile.
4. Trowel additional thin set mortar evenly over the perforated
anchoring leg completely covering the circle cutouts to ensure full
coverage and support of the tile edges. The anchor leg should be
partially buried in the sealant.
5. Ensure the tile is flush with top of profile or slightly lower.
The profile should not be higher than the tiled surface, but rather
up to approx. 1/32” (1 mm) lower.
6. After the tiles and profile have set, fill the grout joint
completely with grout.
7. Gently wipe off any excess grout or thin set mortar immediately.
Specification
| Material | High Quality Aviation Aluminum or customized |
| Color | Black, silver, gold, rose gold, champagne, Tan |
| Length | 2500mm/ customized |
| Width | customized |
| Height | 6/8/10/12/15 mm/customized |
| Thickness | customized |
| Surface Treatment | Brushed, Shiny, Satin, etc. |
| Application | Protection and decoration for the edges and the corners of tiles,
furniture, doors. |
| Service | 1. Free sample;
2. OEM available;
3. Custom-made request;
4. New design solution suggestion |
| Payment Terms | T/T 30% deposit in advance, 70% balance before delivery |
| Delivery | 7-25days |
