UV Panel Protection Aluminium Trim Board Wall Internal Corner
Decoration
Application
Mill finish surfaces should be degreased with white spirit,followed
by cleaning with mild detergent and rinsing with clean cold water.
Wipe over with a dry soft cloth.
Feature
• Stock lengths are 4 metres long.
• Dimensions on drawings are shown in mm.
General: BS & European Standards and Specifications
Aluminium & Aluminium Alloy Extrusions: BS EN 755/515/573
BS EN 755: Extruded bar, rod, tube and profiles. Conditions for
delivery, properties, and tolerances.
BS EN 515: Wrought products, temper designations.
BS EN 573: Chemical composition, form of wrought products
Anodising: BS EN ISO 7599
Anodising of aluminium and its alloys. General specifications for
anodic oxidation coatings on aluminium.
Use
Polyester powder coated finish External applications Fusion bonded
polyester powder coated surfaces will enjoy many years of good
service if regularly maintained. For external applications,
suggested cleaning intervals will vary between once every three
months in harsh industrial or marine environments and up to once
yearly in rural atmospheres. After removing any grease or oil
deposits with a white spirit solution, use a mild diluted detergent
to wash over and rinse with cold clean water. Dry off with a soft
cloth. Abrasive cleaning agents or materials should not be used as
surface scratching may occur. Internal applications After initial
cleaning a regular wipe over with a soft cloth, to remove finger
and dirt deposits, is all that is normally required to maintain
good surface appearance.
Specification
| Name | Aluminium Panel Trim |
| Material | Aluminum alloy |
| Color | Black, silver, golden, rose golden / Customized |
| Application | Decoration for the tiles, funiture, doors. Floor dividing line,
carpet/floor transition |
| Service | 1. Free sample;
2. OEM available;
3. Custom-made request;
4. New design solution suggestion |
| Payment Terms | T/T 30% deposit in advance, 70% balance before delivery |
