Square End Cap Aluminium Panel Trim Wall Tile Corner Protection UV
Board Decoration
Application
Surface Finish:
• Natural anodised finish
• Mill (untreated) finish
Please contact us if you require a surface finish that is not
shown.
N.B. Jig or clamp marks on anodised items can be unsightly, and are
normally positioned up to 50mm in from each end. When aesthetic considerations apply, these
markings should be cut away.
Feature
Wet Wall Trim, Shower Wall Trim, Aluminium, Bright Silver, End Cap
Trim, Internal Corner Shower Trim, External Corner, H Join, Angle
Trim, Extruded Angle, Wet Room
Use
Installation:
Step 1. Carefully unpack the profiles and ensure they are in good
condition & fit for purpose.
Step 2. If the items have been anodised, any unsightly jig marks
should be cut away from the extreme ends, before fixing commences.
Step 3. Select suitable quality fixings that are appropriate for
use with the intended fixing surface.
Step 4. Carefully drill csk. holes through the v-shaped groove,
located in the extended fixing flanges of the wall board profiles.
Step 5. After fixing into position, check that the profiles are
safely secured to the supporting background surface.
Step 6. To ensure stability, make sure the wall boards are fully
inserted into the retaining channels of the profiles.
Cleaning and Maintenance: All that is normally required to maintain
the appearance and prevent the build-up of surface contaminants on
the visible surfaces is an occasional wipe over with a soft, dry
cloth. Any liquids being used for cleaning purposes must be applied
in small amounts to a soft cloth. Grease or oil deposits can be
removed with organic solvent such as white spirit, followed by
wiping over with a mild diluted detergent and rinsing with cold
clean water. Dry off with a soft cloth. It is important that
abrasive cleaners or scourers are not used on the aluminium
surface, as otherwise, damage may occur.
Specification
| Product Name | Aluminium Panel Trim |
| Material | Metal, Aluminium |
| Color | Silver, Golden, Rose Gold, Black Titanium, Red Copper, Champagne,
Bronze, Sapphire, Customized color |
| Surface treatment | 8K mirror, Hairline ,Shiny, Matt, Etching,
Embossing,Anti-fingerprint , Or customized |
| Type | U channel, L shape, T shape , customized shape |
| Thickness | 0.4mm~3.00mm, or customized |
| Length | 2.44/3.05/4m per piece, or customized |
| Application | 1.Wall corner protection , anti-collision 2.Protecting the tile edge
3.Floor ceramic tile edge decoration
4.Anti-slipping for stair nosing
5.Floor dividing line , carpet/floor transition |
| MOQ | 50 M |
| Packing | 1.Each with plastic protective film and plastic shrink film for
each bundle with customized label+ Plywood
case/box/carton,waterproof Kraft paper for each box , customized
request available. 2. 20 pieces per bundle, 80-200 per carton
/box for stainless steel packing. |
| Payment terms | 30% deposit, 70% balance before shipment or against B/L copy. |
| Shipment terms | EXW, FOB , CIF |
