Aluminium Stair Nosing Rubber Flooring Edge Trim Durable Anti Slip Staircase

Application

Stair nosing profile made in aluminium or brass with an anti-skid rubber grooved or flat smooth insert.‎ It is truly ideal for protection and as a safety measure of stair steps with carpet or rubber covering.‎ The profile can be fixed by screws which are placed within the rubber insert track so that the screws become invisible.‎ Practical and long-lasting solutions for the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.Ceramic tile laying jobs may sometimes be quite delicate with problems which differ from standard applications such as linear wall tiling.‎ Stairs, for instance, to be covered with the same tiles as the floor may require non standard spacing to match different heights from step to connecting floor for example.‎ The Stair nosing product range is conceived to face these adjustment problems by featuring valid and lasting technical solutions.‎

Feature

Available in a variety of colors and can be replaced in case of damage or wear.

Wide wear surface, allowing the designer to easily produce stairs with the first and last steps.

wide strip in a contrasting color to increase visibility and safety.

Matching end caps are available.

Use

Installation

1. Select the profile according to the tile thickness and format and the subassembly thickness.

2. Using a notched trowel, apply thin-set mortar over the area where the trapezoid perforated anchoring leg will be placed.Apply several beads of bonding compound or similar to the back side of the vertical wall section of the profile.

3. Press the perforated anchoring leg of profile into the thin-set mortar and align.

4. Trowel additional thin-set mortar over the perforated anchoring leg to ensure full coverage and support of the tile edges.

5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1/32" (1 mm) lower.

6. Set the tile to the integrated joint spacer, which ensures a uniform joint of 1/16" – 1/8" (1.5 – 3 mm).

7. Fill the joint completely with grout or setting material.

8. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

Specification

    Our factory operates 18 modern extrusion production lines, with world-class casting equipment, and oxidizing electrophoresis equipment. The whole on-site manufacturing process includes billet casting, mould design, aluminum extrusion, finishing and packaging. The extrusion quality has been confirmed and received high respect. With the management of a full set of quality-control system, we have gained many quality system certificates, including ISO9001 certificate.