Safety Aluminium Stair Nosing Outdoor Edge Trim Anti Slip Metal
Staircase Protector
Application
Each year slips, trips and falls result in thousands of preventable
injuries. Stair nosings are problem solvers and problem preventers.
With stair nosings, the problem of worn stairs can be prevented.
Nosings can also help prevent the problem of slips and falls
because of their anti-slip features. Commercial buildings, such as
schools, universities, stadiums, and office complexes get a
tremendous amount of pedestrian traffic each day. Building owners
need to take every possible precaution to ensure the safety of
these users and help protect themselves against litigation should
an accident occur. The simple act of adding quality stair nosings
can help prevent slips and falls, add a sense of security, and help
prolong the wear of both the stair tread and the floorcovering
product used on the stairs.
Feature
- Adapted for all floor covering type and thickness
- The rubber black band provides anti-slip protection
- For a state-of-the-art stair finish
- Landing/stair harmony
Use
stair-nosing profiles are resistant to most chemicals encountered
in tiled environments. In special cases, the suitability of a
proposed type of material must be verified based on the anticipated
chemical, mechanical, and/or other stresses. Exceptions and special
consider-ations are listed below.
Aluminum profiles must be tested to verify their suitability if
chemical stresses are anticipated. Cementitious materials, in
conjunction with moisture, become alkaline. Since aluminum is
sensitive to alkaline substances, exposure to the alkali (depending
on the concentration and duration of exposure) may result in
corrosion (aluminum hydroxide formation). Therefore, it is
important to remove mortar or grout residue from visible surfaces.
In addition, ensure that the profile is solidly embedded in the
setting material and that all cavities are filled to prevent the
collection of alkaline water.
Specification
| Product Name | Stair Nosing with Aluminum Strip |
| Material | aluminum |
| Aluminum Finish | anodising/balck anodising |
| Standard color of insert | black or yellow |
| Grade of Aluminum | ASTM 6063-T5 |
| Standard length | 3m or cut to length |
| Size | 71*10mm |
| Thickness | 2.3mm |
