Aluminium Trim UV Panel Decoration Wall Protection Board Tile
Corner
Application
A. Select one of the following finish options
1. Anodized Finish:
a. COLOUR - Satin Clear 10 / ALUMINUM ASSOCIATION SPECIFICATION -
AA-M12C22A31 /
ANODIZING DESCRIPTION: Architectural Class II - Minimum 10μ (0.4
mil) coating
b. COLOUR – Black 18 / ALUMINUM ASSOCIATION SPECIFICATION -
AA-M12C22A44 /
ANODIZING DESCRIPTION: Architectural Class II - Minimum 18μ (0.7
mil) coating
B. Primed Finish:
1. Primer – Oven baked, PPG Duracon 100 Beige Primer.
2. For site paint application with high-quality acrylic latex paint
or factory pre-finished with high-quality
acrylic latex paint or powder coat
C. ColorMatch® Pre-Finished Custom Color:
1. Factory applied high-quality acrylic latex paint
2. Air dried and cured
Feature
- Suitable For 10mm Panels Only
- 2400mm Length - Chrome Finish
- Used On All 90 Degree Internal Corners
- Low Maintenance - Quick & Easy To Install
- Perfect For Bathrooms, Showers, Kitchens & Wet Walls
- Trims Are Delivered Free When Purchased With Panels
Use
Anodised finish
External applications
The smoothness and hardness of anodised surfaces makes for ease of
cleaning. After product installation it is advisable to undertake
the following procedure:
• Remove any grease or deposits with organic solvent, such as white
spirit.
• Swab down with a diluted solution of mild detergent followed by
rinsing with cold clean water.
• After drying, apply furniture cream or wax, to maintain the
highest quality surface finish.As with mill finish aluminium, the
frequency of cleaning anodised surfaces in the external environment
will vary depending on atmospheric conditions. In severely polluted
or marine environments cleaning on a regular basis is
advised.Fascia claddings, shop fronts, profiles, etc, should be
washed over every three months or so, to help maintain the
integrity of surface finish.Anodised surfaces which have been
neglected for considerable periods of time will often require a
more aggressive cleaning procedure. Unfortunately, abrasive
cleaning does cause some removal of the anodic film and the
objective is to minimise the amount of abrasive cleaning to achieve
the desired standard finish.
Specification
Material | Aluminum |
Specifications | width:9mm-120MM |
| thickness: 0.25mm-4MM |
surface | soild color, |
name | u edge banding,t edge banding ,h shape tile tirm |
Packing | carton |
Delivery time | 15-20 days after receiving 30% deposit. |
Payment terms | T/T,L/C,D/A,D/P,Western Union |
Price terms | FOB Yantian or shekou port or ex-work |
Supply ability | 500000m per day. |
Temperature | high temperature and low temperature resistant |
