UV Board Aluminium Trim Panel Wall Protection Decoration Tile
Corner
Application
After the initial cleaning and protective programme has been
adopted for anodised surfaces, (as outlined in the external
applications section), a regular wipe over with a soft cloth, to
remove finger marks and dirt deposits will maintain the lustre of
anodised aluminium indefinitely.
Feature
Extruded aluminum with durable finish.
Aluminum Trim outside corner,Aluminum Trim inside corner,Aluminum
Trim flat divider,Aluminum Trim edge molding 8' length.
Paint & Powder Coating: BS 6496 (1984)
Specification for powder organic coatings for application and
stoving to aluminium alloy extrusions,sheet and pre-formed sections
for external architectural purposes, and for the finish on
aluminium alloy extrusions, sheet and preformed sections coated
with powder organic coatings.
Use
Mill finish (untreated)
External applications
When used externally mill finish aluminium requires regular
cleaning to maintain a relatively good standard of appearance. The
frequency and cleaning method suggested is dependent on the local
environmental conditions.If a cleaning programme is adopted from
outset, the surfaces concerned will respond to the following
treatment:
• Remove any grease or oil deposits with organic solvent such as
white spirit.
• Swab down with a diluted solution of mild detergent followed by
rinsing with clean cold water.To retain a reasonable surface
appearance, frequency of cleaning will vary from once or twice a
year in rural areas;to three or four times per year in mild
industrial areas; to once monthly in severely polluted or marine
environments.Cleaning long established but neglected installations
of aluminium will probably require one or more of the following
methods, depending on the severity of the surface contamination.
• Bristle brush and dilute detergent e.g. Fairy Liquid
• Polishing compounds e.g. Brasso
• Nylon pad impregnated with abrasives e.g. Scotchbrite
• Steel wool in conjunction with dilute detergent
Specification
Material | Aluminum |
Specifications | width:9mm-120MM |
| thickness: 0.25mm-4MM |
surface | soild color, |
name | u edge banding,t edge banding ,h shape tile tirm |
Packing | carton |
Delivery time | 15-20 days after receiving 30% deposit. |
Payment terms | T/T,L/C,D/A,D/P,Western Union |
Price terms | FOB Yantian or shekou port or ex-work |
Supply ability | 500000m per day. |
Temperature | high temperature and low temperature resistant |
